Lumberjack® Root Cutters
The Lumberjack® cutters are available in different models for optimal cleaning effect. The cutters remove roots and other common obstructions in sanitary and storm sewer pipe in accordance with the following model number.
It’s a low-torque, high-speed cutter designed for use with the water pressures generated by most sewer jetting or combination trucks. Because it’s high-speed, the Lumberjack® is especially good at cutting roots, but it’s also commonly used to cut concrete, grease, mineral deposits, tuberculation, protruding laterals, and chemical buildups. And because it’s low-torque, this is one sewer nozzle that is unlikely to get stuck, spin off the hose, or cut through host pipes.
The bearings are sealed, grease-lubricated, and water-cooled. That means the Lumberjack® is practically maintenance-free so you don’t have to lubricate it after use. The water-cooled bearings rarely need to be replaced. Average Life spans ranges from 7- 15 years dependant upon usage.
Lumberjack® cutters rotate at a minimum speed of 10,000 rpm up to 50,000 rpm with flow rates from 10 to 250 gpm at varying pressures. They operate in pipe sizes from 3-inches (75 mm) to 48-inches (1,200 mm). All models clean with barium filled chain links that are cut to size, have optional, removable cutting blades for severe blockages. All models come with propelling jet housing, and most have tow rings.
Lumberjack® Cutter Series
The Lumberjack® Cutter
The Lumberjack® Cutter series is designed to cut through roots, concrete, grease, mineral deposits, protruding laterals, tuberculation and chemical buildups without causing pipe damage. Watch the video to see the power of the Lumberjack® cutter